2 Operatory Mobile Dental Coach

New dental coach will be very maneuverable in tight quarters due to the cab-over design of the cab and chassis, however will offer a significant cost advantage over a bus design. The body is compact, but does not sacrifice utility and maximizes throughput with the mid coach reception area and the dental suites at each end of the coach.

36' 2020 ISUZU FTR commercial cab & chassis mobile dental clinic per the below specifications, cab and chassis specifications:

2 Operatory Mobile Dental Coach Floor Plan

Special cab – deluxe type
Axle ratio 5.125 (41/8) 14.5” hypoid
Automatic transmission-allison LCT2 500-6 speed
Brake system-air over hydraulic dual circuit
Interior trim color combo
Tire-FRT RR 275/70R22.5
Wheel base 5537 mm
Body color code – ARC White
Engine-6 cylinder 6HK1TC-C
Restraint system – seat inflatable, driver & passenger FRT
Country: nigeria
Propeller shaft P46
Air conditioner – manual control
Header console – driver+assist
Anti-noise equipment-ece R51.02
A.C. Generator 24v-60a
Cruise control – automatic
Speed limitter – 100 km
Emission system – EEC 09 (euro-5)
Fuel tank 200l frame side
Driving position-wide leg space
Key lock-tool box
Mirror – outside under view
Lighting system – ECE
Brake regulation-ADR
Lamps-two roof marker
Anti corrosion package
Head lamps – halogen
Inj pump q set-exp special (+5%q)
Fog lamp – standard type
Vin model year – 2020
Spare tire & disc wheel-front tire (one)
Transmission-automatic
Reversing warning buzzer

Truck-heavy duty package var.3
Seat ASM – with assist center seat
Immobilizer system
Long life coolant (50%)
Catalysis control – with DPD
Battery – 115E41
Window – power operated ft door var. 1
Parking brake-rear wheel air control
Wiper – with intermittent
Mirror o/side RR view RH&LH Elec Rem cont heated
Stabilizer shaft – front
Lock – fuel tank cap
Taper leaf SUS-FRT, 2-bag Air SUS-RR
Cab suspension-semi floating
Frt axle: 13,889 lbs
Rear axle: 20,282 lbs
At assembly-driver level air var3 automatic
Disc wheel-special painted topy (silver)
Cab all painting
Am-fm-cd-bluetooth radio
Speaker system – 2 base
Spoiler-front (under) air dam
Owners manual – english language
Hook – tow
Horn – electrical
Interior trim – full trimming
Mirror-outside rearview flat
Remote cont door lock
Fluorescent lamp
Floor mat-vinyl mat
Seat – cloth
Multi information display
Mirror-o/side r/view middle arm
Communication equip – can interface, FMS STD
Air ride rear suspension, 21,000 lbs

Note: Truck specifications may vary due to truck availability.

CALL FOR PRICE

Dental Equipment Included:

a) CEFLA Anthros International Hydro Chair Pkg with cuspidor, doctor and assistant stools
Options
1) #90010235 module with Antheros brushless micromotor i-mms (100 -40,000 rpm/5.3 ncm with fiber optics (2).
2) #90019043 Module with EMS Piezon LED scaler includes one tip type1 and key.
b) CEFLA #WR7XWRNT40 with Extend technology wired wall mounted, 16” (71” maximum extension length) (220V 50Hz) (2).
c) Sierra EGL–T-6 oil-less compressor dual 1.5 HP with dryer 220v (1)
d) Sierra #TV-3 Dry Vacuum System 1HP 220V/50Hz
e) Flight Dental #CLAVEB 23L Class B Autoclave 220–240V, 50/60Hz (2).
f) SharperTek 1.5 gallon Ultrasonic Cleaner 220V/50 Hz (2).
g) Handheld Mobilex Dental X-ray

F.O.B. Amelia, Ohio

Options
1) Windfoil
2) Commercial vinyl wall paper on all interior walls

Interested In: Renting Buying

Toilet required?

Wheel chair required?

Lead Lining Required?

I would like to receive newsletter from KB Consulting.

BODY CONSTRUCTION:

External Body Dimensions:

30’ 10” Long x 102” Wide x 94” High

Internal Dimensions:

30’ 4” Long x 96” Wide x 88” High Ceiling

Floor:

Custom aluminum upper and lower body rail extrusions all around perimeter body
4” high strength steel I- Beams monobolted to lower body rail on 16” center
(2) steel longitudinal I- beams welded to underside of 4” steel high strength I-Beams to match cab and chassis frame rails.
Sub floor shall be continuous 1/2” minimum FRP (Fiberglass reinforced plywood) with sealed edges to prevent moisture intrusion from inside or outside; installed with ¼” plated steel flathead floor screws on 16” centers.

Compartments:

All underbelly storage compartments shall be 1/8” aluminum.
All compartment doors shall be 1/8” aluminum with aluminum continuous hinge using sealed shelter-lite covers over hinges and riveted to compartment. Doors shall have compression seals on edges for maximum sealing features.
Southco thumb pull with adjustable twist-lock security key shall be installed on each door. All keys keyed alike. This feature allows the door to seal all around with one-quarter turn of lock, then another one-quarter turn allows door seal to compress, thus creating a no-leak seal all around.
Please note that all doors are formed to create a “pan” shape with seals recessed 1-1/2” from exterior body, thus allowing rain water to rush by exterior body and not touch door seal.

Skirting:

All skirting shall be 1/8” aluminum and shall be riveted in place using 3/16 aluminum rivets.

Exterior Roof / Interior Ceiling And Exterior Sidewalls/ Interior Walls:

Exterior surface shall be smooth white fiberglass gel-coat .014-.018 thick.
Bonded to ¼” (minimum) thickness exterior continuous plywood.
Bonded to a 2” insulated foam core
Bonded to 1/4” interior continuous plywood sheet.
Interior wall surface is .014-.018 washable white smooth fiberglass gel-coat for the interior walls. (Customer has choice of pastel colors from vendor selection)
NOTES:
- 2”x2” aluminum square tube with .093 thick wall thickness perimeter frame on 26” centers shall be vacuum bonded into ceiling, sidewall structures, and door frame openings.
- All corners shall have MCI’s .125 minimum wall thickness custom aluminum extrusions
- R-factor shall equal 14 for ceiling and side walls, R-factor shall equal R-14 for floor also
- 3” radius aluminum extruded corner cap riveted and sealed on all 4 corners
- All mill finish aluminum shall be painted two coats of white urethane to match body

SYSTEMS

Electrical:

12 Volt DC and 230 Volt 50 Hz AC system
65 amp/230V minimum Distribution Panel and Circuit Breakers
(1) 15.0 KW, 230vV50hz diesel generator w/ insulated extra quiet generator compartment
Generator remote start panel
Shore power system with 65 AMP minimum cord (45’)
Power panel and breakers with outlets. All wiring per NEC and RVIA code
230 VAC Lighting: 2 Tube and 4 tube LED flush mounted lights as required
12VDC Lighting: Emergency battery back-up interior lighting (1), Exterior lighting (1), Storage compartments (3): (Hydraulic, electrical, and generator)

Hydraulics: MCI commercial hydraulic Leveling System with Touch Pad automatic and manual Control

Heating, Ventilation, and Air Conditioning: (3) 13,500 BTU rooftop air conditioners with (3) 5200 BTU heat strips

Computer / Communications

Pre-wire for telephone
Pre-wire for computer per customer instructions

Powered double step rated at 300# at entry door

Wheel Chair Lift: 7030 HD platform lift rated at 1000# installed to include a 48” separate wheelchair door with direct access to rear dental suite.

INTERIOR DECOR

Floor covering: Commercial Vinyl wood grain plank flooring

Overhead and Base cabinets. Cabinetry to include chrome positive twist latches to secure cabinet doors during transit. Customer choice of colors from vendor selection.
Interior doors painted to match cabinets
Painted interior trim to match decor
Ceiling: White smooth fiberglass gelcoat

MISCELLANEOUS

Entry: Color co-coordinated gel-coated Fiberglas non-skid step well entry with (2) interior and (1) exterior handrail
2. Entry Door: 1-3/4” thick 32” commercial steel insulated steel door with (2) 7” X 24” tempered glass and commercial stainless steel lock. Mountwith continuous aluminum hinge and Shelterlite using MCI European design aluminum frame, drip lip and threshold and step
Back-up alarm
(1) Fire extinguisher 5# ABC with mounting bracket
(1) First aid kit / triangle reflector kit
(1) automatic awning included on curbside

SAFETY/SECURITY

Fire Extinguisher: One (1) 5# fire extinguisher
Smoke Detector: One (1) Smoke detector
CO Detector: One (1) CO detector

SHORELINE CORD

Heavy-duty rubber covered 50’ long SO shoreline cord shall be provided. Generator/shorepower transfer switch provided.

STORAGE

(5) 36” wide x 30” tall Interior wall storage cabinets will be provided according to floor plan drawing # 1001125.

MISC.

Wrap around windshield panel included

For more specifications on the Isuzu FTR series truck, please visit: ISUZU Trucks

TERMS:

Milestone Payment Schedule
Payment 1: 45% Down
Payment 2: 30% 6th Week of Production
Payment 3: 25% due at completion

Note: All payments must be made via bank transfer

Completion: Estimated 120-150 days after receipt of Purchase Order and Down Payment contingent upon timely delivery of cab and chassis and dental equipment

Acceptance and Training: Eight hours of vehicle and dental equipment training at our site in Amelia, Ohio

A full set of operational procedures and manuals will be provided

Note: Imaging systems are sold Pre-owned, As-is, Where-is, with No Warranty Expressed or Implied. All Sales Final, No Returns, No exchanges. Request Pictures and Specs. E mail questions.